EN
Translate:
EN
Signed in as:
filler@godaddy.com
Translate:
Drillout Information
hybrid autonomous chemical injection
Features of our proprietary state of the art equipment
- 65Kw Generator
- 15.7 BBL/M Primary Pump
- 2.6 BBL/M Secondary Pump (Gel Mixer Pump)
- Inline Running Side Static Mixer
- 5 Automatic Injection Pumps
- 1 Transfer Pump (Spill Free Chemical Handling)
- Inline Gel Static Mixer
- 16BBL Agitated Gel Tank
- Nucleus Handheld monitoring (PSI, Temp, Flow)
- Single operator operation with handheld device
- Automatic injection ratios by the click of a button
- Fully automated Gel Sweep (Timed or Button Push)
- Valve manifold allowing for complete water control
- 2-250 Watt Lights
- ZERO HUMAN MIXING
Chemical
Our 23D PA Gel is a long chain polymeric gel that has excellent carrying capabilities. What separates us from our competitors is we only need 1 1/2 to 2 gals to achieve an 80-90 viscosity. Our competitors need between 5-10 gallons to achieve the same measurable viscosity.
Our Fr1220 is a concentrated product that requires the minimum usage compared to most. For example we were recently on a job and our competitors were running 1QT/10BBL to maintain circulating pressures. We switched to our FR and dropped the CP's by 500psi and we only needed 8OZ/10BBL.
Our 23D Lube POP is of exceptional value as it is a true water dispersion product with a high affinity to metal surfaces. Many of our competitors use water soluble or partly water soluble products which must be run much differently than our POP. Usually it is a percentage of the 10BBL. (4-8 gals/10BBL to be effective) We only need to introduce a 2.5 gallon slug to coat your entire wellbore and then maintain that coating with 1QT/10BBL.
plug returns
The proof is in the pudding... or in our case the returns.
As you can see, with our Concentrated Quality driven products we are more expensive on the surface but at the end of the job on the final invoice where it counts we are less expensive.